User`s manual

Managing Your LAN Stations
Serving Orphaned LAN Stations
32
3. A window appears with a Target Host list.
4. Click to select the target host for this redundant host, and then click Submit to apply.
4.4 Serving Orphaned LAN Stations
You can designate a computer running Windows MultiPoint Server 2012 as a redundant host for m320-based
LAN stations. Once their host fails, this redundant host will take over all orphaned stations.
NOTE
• Only LAN stations (m320-based) can be taken over by the redundant host;
USB stations (m300 / m302-based) cannot.
• You must install the drivers and utility of LAN stations for a redundant host.
For detailed instructions, please refer to section “3.2 Installing Drivers and the Utility”
on page 19.
• Once their host recovers, LAN stations will be taken over again automatically.
Users will be disconnected from their sessions if any on the redundant host.
To designate a redundant host for LAN stations, please do the following:
1. Log in to the planned redundant host with an administrative account, launch MultiPoint Manager, and then
click LAN Stations tab.
NOTE
• Ensure that the drivers and utility for LAN stations are installed on this redundant
host. Otherwise, LAN Stations tab won’t appear on MultiPoint Manager.
2. On LAN Stations tab, click Failover by station.