User`s manual

Setting Up Your m320

Getting Connected

Connection with the Host — Method 2

To make physical Ethernet connection between the host (running Windows® MultiPoint® Server 2012) and your

m320 using method 2, please do the following:

1. Connect both the host and your m320 to the same Gigabit Ethernet switch.

2. Connect the host to a local area network or the Internet through the host’s second LAN port.

Gigabit Switch

Local Area Network / Internet

NOTE

• If your host computer is equipped with more than one LAN port, you could make

connections using the method 2. No matter which method you use, your m320

will perform network environment detection and choose appropriate network

conguration automatically.

• In case that you need to adjust the network conguration for your m320, please

refer to section “4.7 Adjusting Network Settings for a LAN Station” on page 34.

• It’s recommended to use a Gigabit switch to connect your host server and clients.