User`s manual

Overview
LED Indicators
7
1.6 LED Indicators
Your m320 is equipped with a Power LED to indicate the state of power. The meanings of LED signals are
described as follows:
LED Signal Meaning
Power LED
Off The client is off.
Blue The client is on.
Blue blinking The Identify station with LED function is active.
NOTE
• For instructions on how to identify stations with their Power LED, please refer to
section “4.9 Identifying a LAN Station with its Power LED” on page 36.
The LAN port of your m320 has two LED indicators show the state of networking. The meanings of LED signals are
described as follows:
Left LED
(transmission rate)
Right LED
(transmission activity)
Meaning
LED Signal
Off Off The client is not connected to a LAN.
Off Amber blinking The client connects to a 10 Mbps LAN.
Orange Amber blinking The client connects to a 100 Mbps LAN.
Green Amber blinking The client connects to a 1000 Mbps LAN.