User guide

Connecting and Signing on to an Infranet Controller  73
Chapter 8: Managing Infranet Controller Connections
3. An Infranet Controller dialog opens (Figure 14) and shows the IP address of the
Infranet Controller in the Server URL field. Below that is a Connect to the
Infranet Controller check box. Select the check box to enable a connection to
the Infranet Controller.
Figure 14: Infranet Controller Dialog
4. Sign on to the Infranet Controller when the prompt appears (Figure 15).
Figure 15: Infranet Controller Sign On Prompt.
5. Select a preferred realm if more than one appears. Contact your administrator if
you need help with this. Refer to the Odyssey Access Client User Guide to read
about realms. After selecting a realm, you might need to enter a password if
your configuration does not use your Windows password.
6. Select a role if more than one is configured for you on the Infranet Controller.
Contact your administrator if you need help with this. Refer to the Odyssey
Access Client User Guide to read about roles.
Once you are connected, the dialog displays your endpoint trust status. If the
endpoint status does not meet security requirements, you might be redirected to a
remediation VLAN before getting access to the Infranet Controller. For more
information about remediation, see “Quarantine and Remediation” on page 5.
Connected
Endpoint &
Authentication
Status Icons
Compliance status