User guide

Odyssey Access Client User Guide
70  Using the Auto-Scan List Dialog
Viewing the Names in an Auto-Scan List
To view the names in an auto-scan list:
Double-click the name of the auto-scan list in the Auto-Scan List dialog. The
Auto-Scan List Properties dialog then displays the networks in the auto-scan list in
order of preference.
NOTE: Test the network connection for each network in your auto-scan list
separately. If a network connection on the auto-scan list is configured incorrectly
so that authentication fails each time incorrect attempts are made to that
connection,
OAC does not skip that network to try the next network on the list.
To test a single selected network connection, go to the Connection dialog of the
OAC and select Connect to the network after selecting the network you want to
test.