User guide

Odyssey Access Client User Guide
64  Removing a Network
WEP keys are either 40 or 104 bits long. This corresponds to either 5 or 13
characters when you enter them as ASCII characters or 10 or 26 characters when
you enter them as hexadecimal digits.
To enter any preconfigured WEP keys:
1. In Format for entering keys, select ASCII characters or hexadecimal digits.
2. Type each WEP key that you want to preconfigure into the text fields Key 0
through Key 3, based on the specifications in Table 6.
Removing a Network
To remove a network:
1. Open the Network dialog.
2. Select a network from the list of configured networks.
3. Click Remove.
Table 6: WEP Key Specifications
Bits in the Key ASCII Characters Hexadecimal Digits
40 5 10
104 13 26