User guide

Odyssey Access Client User Guide
52  EAP-POTP Run-Time Dialogs
Using Certificates with EAP-PEAP Authentication
To select EAP-PEAP personal certificate options:
1. Select Permit login using my certificate on the Certificate subtab of the User
Info
tab on the Profile dialog.
2. In the PEAP tab of the Profile Properties dialog, select Use my certificate to
authenticate to the network.
3. Select one of the following personal certificate options:
 Not performed—Inner authentication is not performed. Use my personal
certificate.
 Optional—Inner authentication is optional (determined by the
authentication server).
 Required—Inner authentication is required. Use my personal certificate as
well.
4. Click OK.
EAP-POTP Run-Time Dialogs
You can configure OAC to use EAP-POTP as an inner authentication method for
EAP-TTLS or EAP-PEAP. (You can configure EAP-POTP as an outer authentication
method.)
Configuring EAP-POTP as an Inner Authentication Method
To configure EAP-POTP as an inner authentication method:
1. Configure a network connection that relies on EAP-POTP.
2. Select Connect to the network on the Connection dialog.
OAC then presents one or more authentication dialogs based on your state in the
token card authentication server response/challenge process. Enter the PIN followed
by the current sequence of digits on your hardware token card.
Under some circumstances, you might need to provide a new PIN. You might be
offered the choice of creating your own PIN or using a system-generated PIN:
 Select System-generated PIN to use the PIN provided. Memorize this PIN for
future use.
 Select User-defined PIN to define your own PIN and follow this procedure:
a. Follow the instructions located after the text field to enter a new PIN under
Please enter your PIN.
b. Optionally, you can select Unmask
to see your PIN as you type it.