User guide

Specifying User Info  43

Chapter 5: Managing Profiles

Enabling Soft Token Identification

To enable soft token authentication:

1. If you want to create a profile that uses only soft token authentication methods

(recommended for soft token authentication configuration), clear the Permit

the Profile Properties dialog.

2. Select Permit login using my RSA Soft Token on the Soft Token subtab of the

User Info

tab.

3. Select one of the following options:

 Select Use any token if you have only one token installed in your client

machine.

 Select Use the following token and click Browse to choose a specific

token that is installed in your client machine when you have more than

one token installed. When you do so, the RSA Soft Tokens dialog appears.

Select the soft token that you require and click OK to close the RSA Soft

Tokens dialog.

4. Configure one of the soft token-based authentication options listed at the

beginning of this section.

5. Click OK to save the profile.

Using SIM Cards (EE and EF only)

You can configure SIM card authentication from the SIM Card subtab of the User

Info tab of the Profile Properties dialog.

To use a SIM card when you connect to a network through OAC, you must configure

an OAC user profile for use with your SIM card and assign EAP-SIM and/or EAP-AKA

as the authentication protocol(s).

Your SIM card contains an IMSI (international mobile subscriber identity)— the

calling number issued by your service provider—for identification. If you do not use

the IMSI from the SIM card for SIM authentication, OAC uses the name you specify

as a Login name. See “Configuring EAP-SIM Identity” on page 44.

To use OAC with your SIM card, select Permit login using my SIM card. You can

configure three more items under the SIM Card subtab of the User Info tab.

Setting a SIM Card ID

You can configure OAC to make SIM card connections in one of two ways:

 Use any SIM card that is installed. For this option, select [any] from the SIM

card ID

list.

 Use a specific SIM card ID. For this option, enter your SIM card ID in the SIM

card ID

list or, if you have already inserted your SIM card into your PC, you can

select your SIM card ID from the SIM card ID

list.