User guide

Odyssey Access Client User Guide
22  Content Dialogs
Auto-Scan Lists
Use this option to set up an ordered list of wireless networks that you have
configured. The auto-scan list is convenient when you are moving your computer
from one wireless network to another. OAC uses it to scan the list of networks and
make the first possible connection automatically. See “Managing Auto-Scan Lists”
on page 67.
Trusted Servers
Use this option to add, remove, and configure trusted network servers and to set
certificate and identity information for the servers that might authenticate you
when you connect. Configuring this feature is required for protocols that implement
mutual authentication and is a recommended security measure. See
“Managing
Trusted Servers” on page 79
.
Adapters
Use this option to configure wired and wireless adapters for your computer. See
“Managing Network Adapters” on page 27.
Infranet Controllers
Use this option to configure individual Infranet Controllers to which you need to
connect. See “Managing Infranet Controller Connections” on page 71.
Content Dialogs
A content dialog shows configuration options and controls for the folder option that
you select. If you select an adapter from the Adapter folder, a Connection dialog
displays the network address for the Infranet Controller, endpoint status
information, and a button to connect or disconnect to or from a network.
If you select an Infranet Controller from the Infranet Controllers folder, a
Connection dialog displays connection and endpoint status information and a
button to connect or disconnect to or from a network.
Each of the selections in the Configuration folder has a corresponding content
dialog for setting up and configuring options:
 Authentication profiles
 Wireless networks
 Auto-Scan lists
 Trusted servers
 Wired and wireless adapters
 Infranet Controllers
NOTE: Contact your system administrator before changing any trust configuration
settings.