Specifications

Data Readouts (cont.)
TEST MODE
Z8/Z8m Elliptical Owner’s Guide
115
Targ PWR: The adjusted power requested of the
electromagnetic brake. Will typically be the same as Prog PWR,
except when pedal RPM falls below 60, when torque roll-off
occurs. Example value: 110.
CSAFE CHK CSAFE1 [and] CSAFE 2: Initiates CSAFE port
loopback test. All CSAFE networks must be disconnected, and
correctly-wired loopback cables installed for this test to work.
Press + to start test, which should take a few seconds.
Example values: PASS/FAIL/----.
TEST MODE
Prog PWR:
Prog PWR: (editable): The power requested by the user or
workout program. Example value: 130.