Specifications

Getting Into Setup Mode
SETUP MODE
Z8/Z8m Elliptical Owner’s Guide
103
SETUP MODE

Press and hold .

Begin pedaling the elliptical, or power up with external
power.

At the five-digit “Pass Code” prompt, enter 1 0 1 0 1 . If
you make a mistake, start entering the code from the
beginning. Press .

The first Setup Mode screen will be displayed. Pressing
will switch to the second screen.

Press to accept each parameter and move to the
next one.

When you're done making changes, let the elliptical
power all the way down (the orbiting LEDs on the front
overlay will go out). The changes will take effect the
next time the elliptical powers up.
HOW TO GET
INTO S
ETUP
MODE