Model: VACHV1 120V, 1200W Atrix 1350 Larc Industrial Blvd. Burnsville, MN 55337 www.atrix.com sales@atrix.com Telephone: 952.894.6154 Toll Free Telephone: 800.222.6154 Fax: 952.894.
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING APPLIANCE WARNING: TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR INJURY: 1. Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing. Electrical shock may occur if used outdoors or on wet surfaces. 3. Do not allow to be used as a toy. Close attention is necessary when used by or near children. 2.
GETTING TO KNOW YOUR VACUUM CLEANER 888 8 9 10 14 11 12 15 16 13 17 1. Flexible-Hose w/Handle 10. Crevice tool 2. Power-cord 11. Furniture nozzle 3. Exhaust cover 12. Premotor filter (foam) 4. Release button for exhaust cover 13. Exhaust filters - x2 (included: 1 foam and 1 cloth) 5. Main body 14. Waist belt 6. Release button for air-inlet cover 15. Floor brush 7. Hepa Dust bag cover 16. Hepa dust bag 8. Extension wand 17. Rubber exhaust filter gasket 9.
OPERATING INSTRUCTIONS 1. Hepa Dust bag installation: a. Open the triangular shaped Hepa dust bag cover by gently pressing one end of the locking bar to release the locking mechanism. b. Grasp the cover in your hang, lifting the upper corners of the cover away from the vacuum housing. c. Slide the bottom edge of the cover away so the hinges on the cover slip out of the housing. d. Inside the dust bag cavity, a round foam filter helps to protect the motor.
2. The belt is designed to hold the vacuum securely around your waist while working. Soft Belt: 2a) Wrap the belt around your waist. Adjust it to the desired size by fitting the two Velcro belt bands together. a Belt Locking Clip: 2b) Then insert the toothed connector into the belt buckle until it snaps into place. To disconnect the belt when work is finished, gently squeeze the outer dips together, and pull connector out of belt buckle.
4. Wand assembly: Insert the handle into the extension wand, then insert the wand into the floor brush or accessory tool. Adjust the length of the extension wand by pressing the slide button to adjust the wand length. 5. Tools: Floor Brush - Can be used on carpets and or hard surfaces. The tool allows you to retract the bristle brushes when being used on the carpet or rugs but can be extended when being used on wood or tile surfaces.
Atrix ERGO lite Hip Vacuum WARRANTY INFORMATION Warranty/Service Information: For warranty service informatio n, please contact Atrix or your local Atrix distributor. Atrix ERGO lite Hip Vacuum Limited Warranty: To the original user purchasing the Atrix ERGO lite Hip Vacuum, Atrix warrants that the vacuum will be free of defects in material and manufacture for a period of one (1) year from the date of purchase.
