Use and Care Manual

Fig.14

4. To attach the hose to the blower

port,align the flexible hose and turn

counter-clockwise until it stops.The

hose is now securely in place.

(Fig. 15)

Fig. 15

Operating Instructions

5 . Turn the unit on by pressing the 3. Holding the HEPA dust bag in your

switch located near the base of the hand,slide it out from the slots in

unit to turn the vacuum cleaner on. the bag holder .Hold carefully in

(Fig. 18) order to avoid having dust fall out of

HEPA dust bag.(Fig. 20)

Fig. 18

Fig. 20

Removing & Replacing HEPA

Dust Bag 4. Replace the HEPA dust bag with a

To remove the HEPA dust bag from the new bag. Do not reuse the same

vacuum: bag.

Important: DO NOT use the vacuum 5. The cardboard face of the new bag

without all filters,shake-out bag, and should rest securely in the dust

with or without HEPA dust bag in place. bag cover guides.(Fig. 21)

1. To remove the HEPA dust bag,

press on the canister lid tabs on

each side of the unit and lift canister

lid.(Fig.19)

Warning: To reduce the risk of electric shock, the power cord must be

disconnected before removing the dust bag, shake-out bag,

changing the filters or performing maintenance or trouble-

shooting checks.