Atrix Green Supreme 1-Gal. Dry Vacuum with HEPA Filtration : Use and Care Manual : Page 6

6

Using the Floor to Carpet Brush

1. To attach the floor to carpet brush to

Fig. 7 the telescopic tube, insert the telescopic

2 Push forward on the plastic button and tube into carpet to floor brush. (Fig.11)

pull the inner tube outward to extend for

a longer reach. (Fig. 8)

Fig.8 Fig.11

Operating Instructions

2 Step on the floor to carpet selector

to adjust the height of the brushes.

there are two(2) different heights

one for floors and one for carpets.

Fig. 12

Air Driven Turbo Brush

The efficiency

of your air driven turbo brush depends on the bristle

brush rotating at high speed.

accomplish this. In order to ensure that

Fig 12 . maximum air suction is maintained,

3 To remove the telescopic tube from please read the following instructions:

the floor to carpet brush, pull the 1. Change the HEPA dust bag or empty

telescopic tube out from the floor to the shake-out bag frequently.

carpet brush. 2. Replace the pre-motor and

Using the Attachments exhaust filters as needed.

Dusting Brush 3. Ensure that the rotating brush is

The dusting brush is used for furniture. kept free of hair and string, which may accumulate

Crevice Tool and decrease brush performance.

Use for radiators, crevices, corners, 4. To attach the air driven turbo brush,

baseboards and between cushions. insert the telescopic tube into the air

Pet Hair Remove Brush driven turbo brush.

The pet hair remove brush 5. To adjust the suction control on the air

is used for upholstery. The driven turbo brush slide the suction control

unique surface makes it an for more or less suction as desired

excellent tool for removing Note: The turbo brush has a suction

unwanted pet hair. control on the top of the brush.

Note: This tool is not a grooming tool Open or close to increase or decrease

and should not be used on animals. the suction as desired, I, e, open for high