Use and Care Manual

! 6
Assembling Your Vacuum
•
Push/press fit the hose into the lid opening. (Fig 7)
! Fig. 8
Fig. 7
•
To connect the hose and attachment wand, slide the hose over the hose end wand attachment and
over the bump by approx. ½”. (Fig. 8)
•
Take the hose end attachment wand and insert it into the lower attachment wand (utensil end).
(Fig.9)
Fig. 9
•
Secure the utensil to the end of wand. Align the brass ring with the groove on the floor tool to
ensure a secure fit (Fig. 10)
!
Fig.10