User Manual

6
Manual Suction Control
Your vacuum cleaner includes a
manual variable suction control on
the flexible hose handle. The
suction power can be adjusted by
moving the suction regulator to
the desired position between open
and closed. (Fig. 10)
Open gives you less suction,
closed maximum suction. For
example, less suction is required
on upholstery and draperies
compared to thick carpets, which
require maximum suction.
(Fig. 10)
Using the Floor to Carpet
Brush
1 To attach the floor to carpet
brush to the telescopic tube,
insert the telescopic tube into the
carpet to floor brush. (Fig. 11)
(Fig. 11)
2 Step on the floor to carpet
selector to adjust the height if
the brushes. There are two
different heights one for floors
and one for carpets.
(Fig. 12)
(Fig. 12)
3 To remove the telescopic tube
from the floor to carpet brush,
pull the telescopic tube out from
the floor to carpet brush.
3 To remove the telescopic tube
from the floor to carpet brush, pull
the telescopic tube out from the
floor to carpet brush.
Using the Attachments
Oval Dusting Brush
The dusting brush is used
for furniture.
Crevice Tool
Use for radiators, crevices,
corners, baseboards and
between cushions.
Furniture Nozzle
This utensil is used for furniture
and rugs.
Air Driven Turbo Brush
The efficiency of your air driven
turbo brush depends on the bristle
brush rotating at high speed.
Strong air suction is needed to
accomplish this. In order to ensure
that maximum air suction is
maintained, please read the
following instructions:
1 Change the HEPA dust bag or
empty the shake-out bag
frequently.
2 Replace the pre-motor and
exhaust filters as needed.
3 Ensure that the rotating brush is
kept free of hair and string,
which may accumulate and
decrease brush performance.
4 To attach the air driven turbo
brush, insert the telescopic tube
into the air driven turbo brush.
5 To adjust the suction control on
the air driven turbo brush slide
the suction control for more or
less as desired.
Warning: To reduce the risk of electric shock, the power cord must be
disconnected before removing the dust bag, shake-out bag, changing
the filters or performing maintenance or trouble-shooting checks.