Product Manual

Operation
This appliance is a commercial vacuum designed for dry pick up only. The
motors can run simultaneously or independently as the job requires. This
appliance is designed to sit on top of a standard 55-gallon steel drum.
Filter Changing and Maintenance
Turn off the motor switches and allow the motor to stop running.
Unplug the unit. Remove the motor head from the barrel/drum
adapter. Loosen the screws and remove the filter holder/retainer
and remove the filter assembly.
Gently remove the Polyester Pretreated filter and shake out and
blow off accumulated dust and debris. If necessary, you can gently
rinse the dirt from the bag with water to provide a more thorough
clean. Make sure it is dry before reapplying.
For any dust that is in the MAIN HEPA filter pleats, gently tap on
the side of the drum to remove loose dust and debris. You may
also use low volume compressed air to gently blow the dust away
and out of the pleats.
When your Polyester Pretreated filter or the MAIN HEPA filter
becomes too dirty or if they are damaged in any way, please
replace with new.