Specifications

ManualsBrandsAtrie ManualsComputer equipmentWireSpan 600

3.1.6.5 It shall be possible to send an email alert to the specific email ID for specific single

device

3.1.6.6 It shall be possible run custom action scripts (as desired ) based on specific SNMP

event of the specific device

3.1.6.7 It shall have built in correlation functionalities to create /clear alarm

3.1.7

Alarms

3.1.7.1 There shall be alarm console to view the real-time events.

3.1.7.2 It shall have meaningful message to understand the network issue by correlating the

element related information's like Managed device, interface name, interface

description/alias and event time

3.1.7.3 It shall be possible to configure specific severity to specific type of event

3.1.7.4 It shall have provision to view specific alarm types like Critical, Warning, Information

and Normal

3.1.7.5 It shall be possible to configure similar alarm and able to show only one alarm instead

of displaying multiple such alarms

3.1.7.6 It shall indicate the alarms in different color based on severity

3.1.7.7 It shall be possible to compile the alarm messages for any given SNMP event

3.1.7.8 It shall possible to configure events that needs to dropped to avoid unwanted events in

the event console

3.1.7.9 It shall provide functionality to archive the alarms to database without displaying in the

alarm console.

3.1.7.10 It shall be possible to search the alarm, minimum based on Managed Device

IP/Name, Message text and event time

3.1.7.11 It shall be possible to view alarm of one specific interface from the topology view itself.

3.1.7.12 Alarm must comply to ITU definition of X.733 field formats

3.1.8

Topology

3.1.8.1 It shall automatically draw the logical network topology in graphical view showing the

exact manner the managed elements are connected

3.1.8.2 It shall provide both Layer 3 and Layer 2 network topology

3.1.8.3 It shall give the topology of the allotted managed elements only for that user

3.1.8.4 It shall have different icons for different network devices like Routers, Switches,

Desktops and Servers etc

3.1.8.5 It shall have different icons for different network vendors like CISCO, Nortel etc

3.1.8.6 It shall support containers where in group of devices can be placed inside the

containers and drilling down the containers shall give topology diagram of these

specific nodes that are inside the containers

3.1.8.7 It shall be possible to view the interfaces of the managed elements like routers,

switches etc from the topology it self with real-time status of each interfaces

3.1.8.8 It shall indicate the link status change in different colors like green in normal and red in

down condition

3.1.8.9 It shall be possible to place the managed elements in any specific location of the

screed/background by dragging it.

3.1.8.10 It should be possible to save the positioning of the managed elements in the topology

view

3.1.9

Performance & Reporting

3.1.9.1 It shall provide performance management for the managed devices

3.1.9.2 It shall give Uptime for devices/systems and interfaces with in the devices

3.1.9.3 It shall give resource utilization for system resource like CPU, Memory and Disk

3.1.9.4 It shall give resource utilization for network device resource like Interface traffic, CPU

and Memory

3.1.9.5 It shall be possible run a report on daily, monthly, yearly and custom period on the fly

3.1.9.6 It shall provide reports both in Tabular and graphical chart form

3.1.9.7 It shall be possible to save the report in PDF format

3.1.9.8 It shall be possible to configure upper and lower threshold at least for Interface traffic,

CPU, Memory, Disk Utilization and Uptime

3.1.9.9 It shall be possible to Schedule a report Daily, Monthly, yearly and Custom period and

the Scheduled report shall be sent automatically to specific email ID

3.1.9.10 It shall be possible to configure business hour for any single device separately and