Specifications

GURANTEED TECHNICAL PARTICULARS - ANNEXURE-VII
Support SNMPv1, SNMPv2c, and SNMPv3 and Telnet interface support delivers comprehensive in-
band management, and a CLI-based management console provides detailed out-of-band
management
Support IPV6 management
Regulatory Compliance
Switch shall conform to UL 60950 or IEC 60950 or CSA 60950 or EN 60950 Standards
Switch shall conform to EN 55022 ClassA/B or CISPR22 ClassA/B or CE Class A/B or FCC
ClassA/B Standards
Following Modules for the Switches with the above configration are required
1000BASE-SX Module Multi Mode - 4 nos.
1000BASE-LX Module Single Mode - 2 nos.
4,.7
Lumpsum Maintainence Charges for existing CISCO ROUTER 2801 with 2 WAN Ports, 2 FXS
ports etc. for 4 years
5
ONE TIME CONFIGURATION/SETTINGS AS PER SCOPE MENTIONED in para-2 ‘Scope’ of the
PO.
6
LIASION CHARGES FOR LEASED LINES TO BE ARRANGED BY firm (From Nangal to
Ganguwal,Sundernagar, Talwara & Sundernagar to Slapper, Ganguwal to Kotla)
7
MAINTAINENCE CHARGES FOR LEASED LINES
8 FACILITIES MANAGEMENT SEVICES As per Annexure-XI
9.
NETWORKING COMPONENTS (PASSIVE)
a) UTP CABLE E-CAT 6 E, 500 Mhz( BOX 1000 FT)
b) JACK PANEL FOR 24 CONNECTS E-CAT6E
c) METAL RACKS 9U WALL MOUNT
d) METAL RACKS 42 U FLOOR
e) DUAL ENDED MOUNTING CORDS 7 ‘ E-CAT6E
f) DUAL ENDED MOUNTING CORDS 3 ‘ E-CAT6E
g) SURFACE MOUNT I/O BOX E-CAT6E
h) 6 CORE OPTICAL FIBRE MULTIMODE CABLE (ARMOURED-OUTDOOR) OM3 50/125
MICROMETER PER METER
i) 6 CORE OPTICAL FIBRE SINGLEMODE CABLE (ARMOURED-OUTDOOR) 9/125 MICROMETER
PER METER
j) LIGHT INTERFACE UNIT (LIU) 24 PORT
k) LIGHT INTERFACE UNIT (LIU) 12 PORT
l) SC COUPLER FOR COUPLING
m) SC CONNECTION PANEL
n) SC MM CONNECTORS
o) CLAMPS
p) BLANK PANEL
q) LC-SC Patch Cords duplex 3M/10Ft Multimode
r) SC CONNECTOR SM
s) SC COUPLER FOR COUPLING SM
t) LC-SC PATCH CORD 3M/10FT SM
u) BUFFER TUBBING KIT
v) AVAYA/EQ. CERTIFICATION PER NODE (UTP)
w) FIBRE CERTIFICATION PER CORE
JOB DESCRIPTION/LABOUR WORK
a) LIU FIXING
b) CONNECTRIZATION OF FIBRE
c) JACK PANEL FIXING
d) RACK PANEL FIXING wall mount
e) FIBRE OPTICS CABLE LAYING(UNDERGROUND) / CRIMPING/ CONDUITING CHARGES INCL
GI PIPE (GRADE-B)/m
f) FIBRE OPTICS CABLE LAYING(UNDER THE ROAD) / CRIMPING/ CONDUITING CHARGES INCL
GI PIPE (GRADE-B) /m
g) FIBRE OPTICS CABLE LAYING(OVERHEAD) / CRIMPING/ CONDUITING CHARGES /m
h) UTP CABLE LAYING , CRIMPING / CONDUITING CHARGES INCLUDING PVC PIPE. FITTING
ETC./m
i) UTP CABLE LAYING (UNDER GROUND), CRIMPING/ CONDUITING CHARGES INCLUDING GI
PIPE (GRADE-B), FITTINGS ETC./m
j) UTP CABLE LAYING (UNDER THE ROAD), CRIMPING/ CONDUITING CHARGES INCLUDING GI
PIPE (GRADE-B), FITTINGS ETC./m
k) FIBER SPLICING Per Core
SPECIFICATIONS FOR PASSIVE NETWORKING COMPONENTS
OPTICAL FIBRE CABLE
Cable Type 6-core, Single Mode, Armored, Loose-tube, Gel filled
Fiber Type Single Mode, 9 / 125, 250 micron primary coated buffers
No. of cores 6
Operating Temperature -40 Degree C to +60 Degree C
15