Specifications

Purchase order no. 7/EDP/COMP/106 Dated : 30/09/2011
12
S.
No.
DESCRIPTION
Quantity
UNIT
PRICE
inclusive
of Excise,
Custom
Duty,
Freight &
Forwardin
g,Insuran
ce,
Installatio
n &
Commissi
oing
Charges
CST /
ST (In
Figure)
Service
Tax (In
Figure)
Total Unit
Price F.O.R
Destination
incl. of
CST/ST,
Service Tax,
,Freight
&Forwardin
g, Custom
Duty,
Insurance,
Installation
&
Commissioi
ng Charges
etc.
Total
Amount
F.O.R
Destination
incl. of
CST/ST,
Service
Tax, Freight
&Forwardin
g, Custom
Duty,
Insurance,
Installation
&
Commissioi
ng Charges
etc.
All figures in Rs.
1 2 3 4 5 6 7 8=7*3
Should be supplied with necessary power cards,
data cables, connectors, CD’s, manuals, bracket
accessories, wire managers and other appropriate
accessories.
Performance:
Shall support high performance traffic forwarding
upto 150Mbps with con-current services
Shall support variety of interfaces like V.35 Sync
Serial (64Kbps, 2 Mbps), G.703, Ch-E1, 3G, E3
Interfaces for future uplink purposes, Ethernet
Interfaces – 1Gbps, 10/100 Mbps, 802.3af, ISDN
PRI, BRI, ATM, Digital/Analog dialup and remote
access modules,
Shall support voice interface like FXS, FXO, E&M,
T1/E1
Shall support DSL connectivity using ADSL,
G.SHDSL
Should support integrated capability to host
multiple application min. four like Unified
Communication, Video Surveillance, Storage
System, Network services, or customer
application, etc using different processor, storage,
memory to optimize and consolid
Should support other IP Services like GRE
tunneling, ACLs, IPSEC VPNs, Firewalling, NAT
services.
Shall support Voice traffic optimization with
features like WRED, H-QoS, RSVP, performance
routing and network based application routing
Should support four onboard voice and video
capable digital signal processor
Should support per port PoE power monitoring
Should support management of power to module
slots, to reduce energy consumption
High Availability
Shall support redundant Gigabit Ethernet
connection to LAN
Shall have Redundant Power supply
Shall support fast reboot for minimum network
downtime
Shall support Non-Stop forwarding for fast re-
convergence of routing protocols
Shall support boot options like booting from TFTP
server, Network node and Flash Memory
Shall support multiple storage of multiple images
and configurations
Shall support link aggregation using LACP as per
IEEE 802.3ad
Shall support VRRP or equivalent
Protocol Support
Should support Routing protocols like IS-IS, RIP
v1 & RIP v2, OSPF ver2, OSPF on demand,
BGP4, BGP Route-Reflector
Should support Multicast routing protocols
IGMPv3, PIM-SM, PIM-SS, DVMRP, IPv4 to IPv6
Multicast, BFD, IEEE802.1ah, IEEE802.3ag
Should support DHCPv6, IPv6 QoS, RIPng,
OSPFv3
Shall support MPLS, Layer2 and Layer3 VPN,
L2TPv3
Support for Load balancing Protocol.