User manual

Atrie DB108Ethernet User Manual
Page 6 Total 17 Pages
3.CONFIGURATION
3.1 DEFAULT CONFIGURATION
ADSL MODEM has pre-configured with the following VCI/VPI. The default dial-up mode is bridge
encapsulation. For bridge mode, no need to configure any more parameter. However, the third party dial-up
software is needed for connection with the Internet
Tabel 3.1
Link Name VPI VCI
pvc_0_32 32 0
pvc_8_35 35 8
pvc_0_35 35 0
pvc_8_81 81 8
3.2 COMPUTER CONFIGURATION
The default IP address for ADSL MODEM is: 192.168.1.1; The Subnet Mask is255.255.255.0. Users can
configure ADSL MODEM through an Internet browser. ADSL MODEM can be used as gateway and DNS
server; users need to set the computers TCP/IP protocol as follow:
1 Set the computer IP address at same segment of ADSL MODEM, such as set the IP address of the
network card to one of the “192.168.1.2” “192.168.1.254”.
2 Set the computers gateway the same IP address as the ADSL Modems.
3 Set computers DNS server the same as ADSL Modems IP address or that of an effective DNS server.
3.3 ADSL MODEM CONFIGURATION
3.3.1 LOG IN
Open the browser; input http://192.168.1.1 at the address column. Press “Enter” key then the entry dialog
box will show up as Figure 3.1. Input “username” and “password” (capital sensitive), then press Enter.
Figure 3.1