User manual

Atrie DB108 WL User Manual
- 5 -
2.3 SOFTWARE CONFIGURATION
2.3.1 PREPARATION FOR SOFTWARE INSTALLATION
Before installation, please consult ADSL service provider for parameters. Table 2.1 shows all the
information needed to configure according to different protocols.
Table 2.1
VIRTUAL DIAL MODE
PRIVATE LINE
MODE
PROTOCOL
PPPoE PPPoA 1483
BRIDGE
1483
ROUTING
1577
PRIVATE
LINE
VPI VPI VPI VPI VPI
VCI VCI VCI VCI VCI
LLC/VCMUX LLC/VCMUX LLC/VCMUX LLC/VCMUX LLC/VCMUX
USER NAME USER NAME
IP ADDRESS/
MASK
IP ADDRESS/
MASK
NECESSARY
INFORMATI
ON
PASSWORD PASSWORD GATEWAY GATEWAY
INSTALLATI
ON GUIDE
3．3 3．3
3．1
3．2 3．2
2.3.2 COMPUTER CONFIGURATION
The default IP Address of the device is：192.168.1.1. Subnet Mask is：255.255.255.0.Users can configure it
through an Internet browser. ADSL MODEM can be set as a gateway and a DNS server; users need to modify
the computer’s TCP/IP protocol property as following:
1． Set the computer’s ip address at same Internet segment with ADSL MODEM.
2． Set the ADSL Modem’s LAN IP address as the IP address of computer’s gateway.
3． Set the ADSL Modem’s LAN IP address or an effective DNS server IP address as computer’s DNS
server ip address.
4. Wireless configurations are set as 2.3.5.
2.3.3 DEVICE CONFIGUTATION
Open the Internet browser; input http://192.168.1.1 in the address field. Press “Enter” key then the login
dialog box will pop up as Figure 2.2, Input username: admin, and password: password to log in device. (Note
that this is capital sensitive).
Figure 2.2