User manual

Atrie DB108 WL User Manual
- 17 -
Note: The maximum addresses you can be blocked is four. Input MAC address in source MAC field means
blocking the MAC address to connect another device or the device. Input MAC address in destination MAC
field means blocking the MAC address to respond connection from other MAC address. Input source MAC and
Destination MAC concurrently will be ignored
5.2 STATUS
1 ADSL
Click “ADSL” in the left frame, the line status of ADSL, elapsed time, connection speed, signal noise ratio
and the line attenuation will be shown in the right frame. The result is shown as figure 5.3
Figure 5.3
2 SYSTEM LOG
Click “System Log” in the left frame. The system working record will be shown in the right frame. User
can save it for later diagnosis. The result is shown as Figure 5.4