User manual

Atrie DB108 WL User Manual
- 13 -
Figure 3.5
2． LAN SETTINGS
Keep the default configuration.
3． NAT SETTINGS
Set “NAT” to “Dynamic NAPT” or “NAPT” which is shown as Figure 3.4 ,then click “Submit” to
save the settings。
Note: If you select “NAPT” you must close other PVC. Refer to 2.3.6 for details.
4． Click “Save Settings” button in the left frame and Click “Submit” in the right frame to save all above
settings, which is shown as Figure 2.3. Then modem will restart automatically and run with new
parameters.