User manual

Atrie DB108 WL User Manual
- 12 -
3.3 PPPoE/PPPoA CONFIGURATION
There are two ways for PPPoE configuration: 1483 bridge plus third-party dial-up software and internal
virtual dial-up.
1483 bridge plus third-party dialing software：
z Set 1483 BRIDGE mode.
z Install “dial-up software” such as Enternet300, WinPoet and RasPPPoE. For more details please contact
the DSL provider.
z Use the “dial-up software” to dial up.
Internal virtual Dial-up function
1． WAN SETTING
z Click “Wan” anchor in the left frame and select the virtual circuit in the left frame. Click “submit” button.
z Set “Enabled” to“Ye s”；
z Input the value of VPI and VCI (For example VPI=0/VCI=32)；
z To PPPoE mode，select “PPPoE LLC” or“PPPoE VC－MUX” in “ENCAPSULATION ” item (some
values need to be provided by DSL provider ) ;
z To PPPoA mode，select “PPPoA LLC” or“PPPoA VC－MUX” in “ENCAPSULATION” item (some
value need to be provided by DSL provider )
z Select “Disabled” in “BRIDGE” item；
z Input appropriate username and password. (some value need to be provided by DSL provider, here we use
“adsl” as an example ) in PPP “User Name” field and “Password” field；
z Results are shown as Figure 3.5.
Note：
z The selection of “Automatic Reconnect“will make ADSL MODEM to dial-up automatically once
the CO disconnected the PPP connection.
z Authentication can be set either“PAP“or ”CHAP“. Consult with DSL provider for details or keep
it as default.