User manual

Atrie DB108 WL User Manual
- 11 -
Figure 3.3
2． LAN SETTINGS
Keep the configuration as default。
3． NAT SETTINGS
Select “Dynamic NAPT” or “NAPT” as Figure 3.4 , then click “Submit” to save the settings。
Note: If you select “NAPT” you must close other PVCs. Refer to 2.3.6 for details.
Figure 3.4
4． Click “Save Settings” button in the left frame and Click “Submit” in the right frame to save all above
settings, which is shown as Figure 2.3. Then modem will restart automatically and run with new
parameters.