User manual

Atrie DB108 WL User Manual
- 9 -
3. PROTOCOL CONFIGURATION
Different protocols can be set in “WAN ”、“LAN”、“NAT”page. Click on the relevant anchor to enter the
right page.
3.1 RFC1483 BRIDGED CONFIGURATION
1. WAN SETTINGS
z Click “Wan” anchor in the left frame and select the virtual circuit in the left frame. Click “submit” button.
z Set “Enabled” to“Ye s” on the top of the page；
z Input values of VPI and VCI (For example VPI=0/VCI=32)；
z Select “1483 Bridged IP LLC” or “1483 Bridged IP VC－MUX” in “encapsulation ” (some data need
to be provided by DSL service provider);
z Select “Enabled” in “BRIDGE ” item；
z Click “Submit” on the bottom of the page to save the parameters.
z The result is shown as figure 3.1.
Figure 3.1
2． LAN SETTINGS
Keep the default configuration.
3． NAT SETTINGS