User's Manual
Table Of Contents
Confidential Document
3.5.
3.5.
Wireless
Relay
Wireless Relay
The optional wireless relay is used for immobilizing vehicle when AX5 device is unplugged. Using the short
range RF technology, the Wireless Relay will keep receiving RF data from AX5. Once the Wireless Relay
loses connection from AX5 for 30 seconds, the Wireless Relay will be switched off. For safety reasons it is
recommended to connect the Wireless Relay to control the starter of vehicle. Do NOT use the Wireless Relay
to control fuel pump or power train of vehicle. See the following diagram for the wiring connection of Wireless
Relay.
3.6.
3.6.
LED
Indication
LED Indication
The following table describes the LED operation of AX5:
LED Indicators Color LED Status Description
OBD
Green
Solid OFF
Fast blinking
Blinking every 10 seconds
OBD Protocol not found
OBD-II data transmission.
Deep sleep mode
GPS
Blue
Solid OFF
Blinking every 1 second
Solid ON
GPS power OFF
GPS not fix
GPS Location Fix
GSM
Red
Solid OFF
Blinking every 1 second
Blinking every 2 second
Blinking twice every 2 second
GSM Power OFF
GSM no signal
GSM registered
GPRS connected
© ATrack Technology Inc. All Rights Reserved. Page 6 of 21