User's Manual

Confidential Document

4.2.

Configure

the

AX5

device

Configure the AX5 device

The AXTool is a simple configuration tool for the AX5 device. It is useful for user to setting basic parameters

into the AX5 device. For advanced users, please refer to the ATrack A-Series Protocol Document for detail

descriptions.

z General Setting

[Device Password]: The device password is used for protecting device configurations. The maximum

length is 6 characters.

[SIM Card PIN Code]: Enter PIN code of SIM card correctly for register to network property if enabled.

[Position Format]: Select position format for all reports.

[Power Saving Mode]: Enable/Disable power saving mode. When power saving mode is enabled, the

AX5 device will go into deep sleep mode after 1 minute of engine off.