Specifications

Wireless Phone Charger & Holder
Qi Fast Charging
Adjustable Stand
Infrared Sensor Lock
Power Charging Indicator
Foreign Object Detection (FOD)
Turn clockwise to lock
Turn counterclockwise
Air Vent
02
2.Grip to the Air Vent by the Air Vent Clamp.
04
How To Use
Fixing Nut
01
Air Vent
Clamp
1.Connect the Air Vent Clamp to the device and
secure them by screwing the Fixing Nut.
03
03
3.When putting the phone closer to the wireless
charger, the electronic arm will open automatically.
Notice: Adjust the stand to get the best alignment.
04
4.Press the unlocking
key on either side of
the device to open the
arms
Unlock Key
(Button)
Bracket sucker
This is another option
to mount this device
in your car.
Input(max):5V/2A;9V/2A;12V /1.8A
Output:5W 5V/1A ;7.5W 7.5V/1A
10W 9V/1.12A ;15W 9V/1.67A
05
Troubleshooting
1.The Charging Indicator flashes red light and the wireless
charging can not go on.
Reason: The Foreign Object Detection (FOD) feature is
working. It means:
(1).The receiving coil of the phone is not well aligned with
the charger' transmitting coil. Please adjust the stand to get
the best alignment. The phone's receiving coil is usually
located in the back center and the transmitting coil of the
charger is marked as a circle on the surface. A good
alignment can ensure the charging efficiency.
(2).Metal object other than phone is put on the surface of
the charging panel
(3).Phones that doesn't support wireless charging is put on
the charging panel
2. The temperature of my phone goes high during
wireless charging.
Reason: It's pretty normal that the phone's temperature
goes high when running navigation app or playing video
on your phone during wireless charging. If the temperature
goes extremely high, please stop the charging and charge
it again after the phone cools down, or install the phone
holder over the vehicle's air vent.
08
Appearance/Button Description
01
Wireless
Charging Area
Green: On charging
Light off: Fully charged
Distance
Sensor
Charging
Indicator
Unlock Key
(Touch)
Adjustable Stand
Unlock Key
(Button)
Electric Clamp Arm
Power Input
(Type C)
Electric Clamp Arm
02
06 07
Pull down to lock and secure the connection after the
sucker sucks onto the glass.
Specification
to unlock.
Write to us if you need further help ([e-mail])