Installation Sheet

6
--Door handle Installation
Model MWF9010GR, MWF9013GR and MWF9016GR have extension door handle, it need to be
installed at field when the freezer is located in the user place, the door handle parts are packed in a bag
inside cabinet when freezer arrive at user location.
The procedure of handle installation is:
 Install the handle frame at the front edge of door according to existing screw hole located at door;
 Install door lock latch on the cabinet according to screw holes located at front of cabinet;
 Install the handle cover on the handle frame.
Operation Instruction
--Setting temperature control
For safe food storage, let the freezer run for 4 hours continuously, before placing food into the cabinet.
The temperature setting of the freezer can be adjusted by moving the thermostat axis position. It can be
changed with screw driver or a coin shaped tool.The recommended setting for the freezer is at position
“4”. Turn axis to its original position when the articles are frozen. Do not fast freeze for more than 4-5
hours. To decrease the temperature (colder), turn towards position close “7”. To increase the temperature
(warmer), turn towards position close “1”.
CAUTION
Setting the temperature control to the coldest setting may causethe evaporator coil to freeze and ice up.
This will eventuallyresult in a warmer cabinet temperature.