INSTRUCTION MANUAL forSolid Top Chest Freezer MWF9007 MWF9010GR MWF9013GR MWF9016GR Please read this user’s manual thoroughly before using. Keep this manual handy for further reference. Revision 2019 Email: warranty@atosausa.
Warranty Information One YEAR WARRANTY All claims for parts or labor must be made directly through Atosa.All claims must include: model number of the unit. the serial number. proof of purchase, date of installation. and all pertinent information supporting the alleged defect.In case of compressor replacement under warranty.either compressor or compressor tag must be returned to Atosa along with above listed information. Failure to comply with warranty policies will result in voiding claims.
Atosa is not responsible for the repair or replacement of any parts that are determined to have been subjected after the date of manufacture to alteration, neglect, abuse, misuse, accident, damage during transit or installation, fire, flood, or act of God. IMPROPER ELECTRICAL CONNECTIONS:Atosa IS NOT RESPONSIBLE FOR THE REPAIR OR REPLACEMENT OF FAILED OR DAMAGED COMPONENTS RESULTING FROM ELECTRICAL POWER FAILURE, THE USE OF EXTENSION CORDS, LOW VOLTAGE, OR VOLTAGE DROPS TO THE UNIT.
Product Information --Preface This instruction manual provides all the necessary information regarding: Use of the freezer Technical specifications Installation and handling Operator procedures and instructions Maintenance operation The manual is to be considered an integral part of the freezer and should be stored in a safe place for future references to insure a long life of the freezer.
Installation Instruction --Unpacking and Handling The freezer is in the package of cardboard box with foam boards protect when it arrives at user’s place. The freezer must be transported and handled with care to avoid posing a hazard to persons or property. Never place a freezer on its side or turn it upside down as this may damage or impair operation of the refrigerated unit.
--Door handle Installation Model MWF9010GR, MWF9013GR and MWF9016GR have extension door handle, it need to be installed at field when the freezer is located in the user place, the door handle parts are packed in a bag inside cabinet when freezer arrive at user location.
Maintenance Instruction --Care and Cleaning The freezer should be cleaned periodically; generally clean it every 30-45 days. Unplug before cleaning and use a soft cloth with a solution of warm water and mild soap to scrub inside and outside of the cabinet. Do not use acids, chemical thinner, gasoline or benzene for cleaning any part of the chest freezer. Dry it with a soft cloth. Never use water to rinse the freezer.
Technical Service Information --Explore view --Service part list No in explode view Description Service Part No Door for MWF9007 MWFP901 Door for MWF9010GR MWFP902 Door for MWF9013GR MWFP903 Door for MWF9016GR MWFP904 Door Gasket for MWF9007 MWFP905 Door Gasket for MWF9010GR MWFP906 Door Gasket for MWF9013GR MWFP907 Door Gasket for MWF9016GR MWFP908 Control Panel MWFP909 1 2 3 8
Continue part list No in explode view 4 Description Service Part No Compressor for MWF9007 MWFP910 Compressor for MWF9010GR MWFP911 &9013GR Compressor for MWF9016GR MWFP912 5 Thermostat MWFP913 6 Filter MWFP914 7 Compressor apartment Cover(9007) Compressor apartment Cover(9010GR above) MWFP915 MWFP916 8 Outter Drain plug MWFP917 9 Inner Drain plug MWFP918 Basket for MWF9007 MWFP919 Basket for MWF9010GR-9016GR MWFP920 11 Hinge Cover MWFP921 12 Door Hinge MWFP922 Not showed in
--Electric Connection Diagram MWF9007 Diagram MWF9010GR/9013GR/9016GR Diagram 10
--TroubleShooting Problem or Concern The indicator is not on. The compressor doses not start. Possible Cause Common Solution The plug isn’t connected to the socket really. Replug it. no power Connect the socket with power. The indicator is on ,but the compressor doesn’t work and buzzes only The power voltage is＜98V. The compressor stops a minute after start, and restart after a few minutes, and so repeatedly. The power voltage is＞132V. The door frequently.
