Installation Sheet

Email: [e-mail]
Installation Instruction
--Unpacking
and Handling
The freezer is in the
package of cardboard box with foam boards protect
The freezer
must be transported and handled with care to avoid posing a hazard to persons or property.
Never place a freezer on its side or turn it upside down as this may damage or impair operation of the
refrigerated unit.
We can not held liable for any damage or d
of the equipment or non-
compliance with the safeguards illustrated above.
-- Side clearance for the
freezer
Install the freezer in an indoor and well
Keep side clearance for
the freezer, leave a 3 inch
(75mm) clearance at each side of the freezer for
adequate air circulation.
--Electric connection
WARING
Electric connection must be carried out by professional and qualified persons
The mai
ns voltage corresponds to the voltage on the freezer 115V/60Hz/1Ph;
operation it is essential for the power supply voltage to come within a range of +/
rated voltage.
The freezer should be plugged into a grounded and properly
overcurrent protection. Please refer to the electrical requirements on the nameplate.
Make sure that your unit has its own dedicated outlet. Do not use a
Do not cut, remove or bypass the grounding prong
Service Tel: [phone]-
0399
Installation Instruction
and Handling
package of cardboard box with foam boards protect
when it arrives at user’s place.
must be transported and handled with care to avoid posing a hazard to persons or property.
Never place a freezer on its side or turn it upside down as this may damage or impair operation of the
We can not held liable for any damage or d
efects arising directly or indirectly from improper handling
compliance with the safeguards illustrated above.
freezer
Install the freezer in an indoor and well
-ventil
ated area with even flat ground.
the freezer, leave a 3 inch
(75mm) clearance at each side of the freezer for
Electric connection must be carried out by professional and qualified persons
ns voltage corresponds to the voltage on the freezer 115V/60Hz/1Ph;
operation it is essential for the power supply voltage to come within a range of +/
The freezer should be plugged into a grounded and properly
-
sized electrical outlet with appropriate
overcurrent protection. Please refer to the electrical requirements on the nameplate.
Make sure that your unit has its own dedicated outlet. Do not use a
n extension cord.
Do not cut, remove or bypass the grounding prong
0399
5
when it arrives at user’s place.
must be transported and handled with care to avoid posing a hazard to persons or property.
Never place a freezer on its side or turn it upside down as this may damage or impair operation of the
efects arising directly or indirectly from improper handling
ated area with even flat ground.
Electric connection must be carried out by professional and qualified persons
ns voltage corresponds to the voltage on the freezer 115V/60Hz/1Ph;
to ensure proper
operation it is essential for the power supply voltage to come within a range of +/
-10% of the unit’s
sized electrical outlet with appropriate
overcurrent protection. Please refer to the electrical requirements on the nameplate.
n extension cord.