Installation Sheet

17
11 SUBSTITUTION OF SPARES
Before commencing any service or maintenance work, isolate the cabinet
from the electrical supply.
Always fit original spares which may be obtained from an authorized
concessionaire or stockist.
12 DISMANTLING
The scrapping of the cabinet requires to be undertaken by specialized
company, licensed by the local authorities, and observing local statutes.company, licensed by the local authorities, and observing local statutes.
Polyurethane foaming material, not fire-resistant, when deal with the
material, should be according with local law and statue.
- The cabinet consists of:
- Structure in steel plate,
- Electrical components and cables,
- Electrical compressor.
-- Plastic materials,
- Refrigerant fluid which must not be discharged into the atmosphere.
Operating Instruction
1. New upright air-cooling refrigerator should be
opened and ventilate it before it is in use.
2. After connecting the power supply, press the
“POWER” switch on the controller keyboard (Green Indicator Light ON),
the fridge will come to work. The microcomputer controller, installed in
the controller keyboard, could automatically adjust the temperature
ranges. This intelligent digital controller works as: if the temperature ranges. This intelligent digital controller works as: if the temperature
increases and reaches set point plus differential the compressor is
started and then turned off when the temperature reaches the set point
value again.