User manual

User manual Version 1.0
SW5002 Wireless Serial Server
Copyright © 2007 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan
- 54 -
Fig 74. Configure Device by utility
Fig 75. Change settings by Monitor.exe
Clicking on the “Configure Now” button, the target device return an ACK message indicating the
modification is successful as shown follows.
Fig 76. “Ack” message from monitored device
.
Functional description
The following table lists the functional descriptions for each field.
Field Name Field Descriptions
Broadcast IP
Except for the default IP 255.255.255.255, other items (IPs) are read from the
file “seg.cfg”. This field specifies a detecting IP range. It may be a designated
IP or a broadcast IP.