User manual

User manual Version 1.0

SW5002 Wireless Serial Server

- 53 -

Appendix B. Configuration Utility & SNMP

B.1. Monitor.exe

The configuration utility is the main utility program used to display and to configure SW5002’s

settings.

Run the utility

Start the program under environment and the following window shall appear.

Fig 73. Device list from Monitors Configuration Utility screen.

Detecting Operational Devices

Follow steps below to detect all devices currently available on the network.

 Start monitorXX.exe utility program.

 Select an item from the Broadcast IP list.

 Specify a number on Wishes box.

 Click on the Invite button. This will display all the devices requested.

Configure Devices

Use monitor.exe to configure the settings of devices on the network. To do so, please follow the steps

below.

 Bring up devices information by executed monitor.exe

 Select the device to be configured from IP Address, Click on the “Config” button, a configuration

dialog box will popup as shown in 074.