User manual

User manual Version 1.0
SW5002 Wireless Serial Server
Copyright © 2007 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan
- 45 -
6.4.5. Packet Delimiter
[Main]  [4 Serial Settings]  [8 Delimiter (Network to Serial)]/ [9 Delimiter (Serial to Network)]
Packet delimiter is a way of controlling the number of packets in a serial communication. It is designed
to keep packets in track. SW5002 provides two ways in packet delimiter parameter setting: (1) Packet
delimiter by timer and (2) Packet delimiter by character. By default, packet delimiter timer is 10
ms. The ranges of packet delimiter timer is 10 to 30,000 ms, If “character pattern’ is selected, for a
data stream ended with “0x0d0a”, then the entire data buffer of the serial device is transmitted.
User can change packet delimiter timer by following the steps below.
Configure Network Delimiter using Timer
[Main][4 Serial Settings] [8 Delimiter (Network to Serial)]/ [9 Delimiter (Serial to Network)]
[1 Timer]
User can choose packet delimiter timer’s value as the packet delimiter indicated in Fig. 63 below
Fig 63. Configure Network Delimiter using Timer
Configure Network Delimiter using Characters
[Main][4 Serial Settings] [8 Delimiter (Network to Serial)]/ [9 Delimiter(Serial to Network)]
[2 Characters]
User can choose packet delimiter character pattern as the packet delimiter indicated in the Fig. 64
below: