User manual

User manual Version 1.0

SW5002 Wireless Serial Server

- 33 -

6.2.1. LAN Settings

Operation: [Main][2 Networking][1 LAN Settings]

Select “1” from “Input choice (0~3) and enter on Networking page:” to enter LAN Settings

page. The MAC address, IP address, subnet mask, gateway address, and IP mode information

will be shown (Fig. 42). User also can set IP, Netmask, Gateway, and IP mode of LAN interfaces by

enter the corresponding menus and values. For example, enter 1 for setting the IP address on LAN

interface.

Fig 42. LAN Settings by Telnet

6.2.2. DNS Settings

Operation: [Main][2 Networking][2 DNS Settings]

Select “2” from “Input choice (0~3) and enter on Networking page:” to enter DNS Settings page.

Fill in the DNS information DNS1 or DNS2 or both according to user DNS server (Fig. 43).

Fig 43. DNS Settings by Telnet