User manual

User manual Version 1.0
SW5002 Wireless Serial Server
Copyright © 2007 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan
- 25 -
Fig 30. UDP protocol in Link mode
 Note: In this phase, UDP mode does not support Virtual COM mode.
5.5.5. Serial Settings
This filed can be configured with serial parameters for SW5002. Here User can configure Serial
parameters, include UART Mode, baud rate, parity, data bit and type of flow control.
 Configure UART Mode: RS-232 or RS-485 or RS-422
 Baud rate: 1200/2400/4800/9600/19200/38400/57600/115200
 Parity: None or Odd or Even or Mark or Space
 Data bits: 7 or 8
 Stop bits: 1 or 2
 Flow control: None or Xon/Xoff or Hardware (RTS/CTS).
Fig 31. Serial Communication Settings from Web Page
 Note: The isolation, SW5002-WgN1Sis (TB), only support max 230Kbps baud rate.