User manual

User manual Version 1.0

SW5002 Wireless Serial Server

- 24 -

Fig 28. TCP Server in Link mode

 Note: Enable Virtual COM mode if the remote site PC’s “Serial to IP” tool is installed

5.5.3. TCP Client Mode

User may enter destination IP & port (default: 4660) to establish connection of counter-pair (remote)

host (For example, another SW5002, or PC for data-collection). SW5002 can support two destination

hosts simultaneously.

Fig 29. TCP Client in Link mode

5.5.4. UDP Mode

SW5002 can be configured in a UDP mode to establish connection using Unicast or Multicast data

from the serial device to one or multiple host computers. Vice versa is also true. For example, the

original RS-422/ RS485 bus can be transferred and extended connected distance by SW5002s.

The destination IP is assigned by single IP or group IPs, The configuration is limited by the Local

Listening Port. For example, on SW5002 listening port is 4660 which receive data sending from the

host computers. SW5002 can support up to 4-group IPs for UDP connection, if users needed.