User manual

User manual Version 1.0

SW5002 Wireless Serial Server

- 23 -

Fig 27. COM port Information Web Page

5.5.1. Link Mode Settings

 Click on the “Serial” link and the Fig. 27 screen will appear.

 Fill in Serial parameter information on Serial Settings field

 Click on “Save Configuration” button to save the changes.

5.5.2. TCP Server Mode

TCP Server mode is default Link mode of Serial Settings, and it can wait for connecting

requirement from remote host PC which running “serial-to IP” utility or setting SW5002s in tunneling

mode. User has to configure listening port to allow client establish connection to this server. Default

port number of SW5002 is 4660.

IP filtering function is a simple ACL (Access Control List). It can be disabled by setting FILTER_IP to

“0.0.0.0”.

User can configure one or group IP for source IP. If IP filter is enabled, only source IP assigned can

be connected to SW5002