User`s manual

User manual Version 1.1
SE5408/SE5416 Multi-port
Serial Server
Copyright © 2010 ATOP Technologies, Inc.
All rights reserved. Designed in Taiwan
- 69 -
Appendix E. Specifications
E.1. Hardware
System
CPU 32-bit 266MHz RISC Processor with MMU
Flash Memory 2 + 8 MB (2MB for Bootloader)
RAM 32 MB DDR
EEPROM 8 KB
Reset Built-in Recessed Key (Restore to Factory Defaults)
Watchdog Hardware built-in
Network
Ethernet Interface IEEE 802.3 Compliance
Dual Port 10/100Mbps Auto-Detection
Connection: RJ-45
Auto MDI/MDI-X: No
Protection Built-in 1.5 KV Magnetic Isolation
Protocol ICMP, TCP/IP, UDP, HTTP, Telnet, DNS, DHCP Client, SNMP, SMTP,
NTP, ARP
Serial
Serial Interface RS-232/RS-422/RS-485 Software Selectable (Default: RS-232)
Serial Protection 15KV ESD
Serial Connector RJ-45 (8-pin) Connector Type
SE5416---16 Serial Ports
SE5408--- 8 Serial Ports
Serial Port
Communication
Baud-rate: 110 bps ~ 921600 bps
Parity: None, Even, Odd, Mark, or Space
Data Bits: 5, 6, 7, or 8
Stop Bits: 1 or 2
Flow Control: None, Hardware CTS/RTS, Software Xon/Xoff
LED Indicator
LED indication Power x 1
Ready x 1
COM port TX x 16 (SE5416); x 8 (SE5408)
COM port RX x 16 (SE5416);x 8 (SE5408)
Power Requirement & EMC
Input 100~260 V
Consumption Max. 8.5 W
EMC FCC Class A, CE Class A
Mechanical
Dimensions 436mm x 43.5mm x 200mm (W x H x D)
Casing SECC sheet metal (1 mm)