User`s manual

User manual Version 1.1
SE5408/SE5416 Multi-port
Serial Server
Copyright © 2010 ATOP Technologies, Inc.
All rights reserved. Designed in Taiwan
- 61 -
Fig 76. UDP Link Mode with one Destination
Fig 77. UDP Mode with 2 Destinations
Serial Settings
In the Serial settings, you can specify the parameters of serial communications for each COM port.
Once you have finished setting one COM port, you may use “Copy to other COMs” to copy your setting of
the current COM port to other COM ports.
Fig 78. Serial Port Settings: SerialManager
Locate
This is an important function which does not exist in the Web-based program. Click “Locate” on a given
device on the list to force the serial server to beep continuously; you can only stop beeping by clicking
“Locate” again.