User`s manual

User manual Version 1.1
SE5408/SE5416 Multi-port
Serial Server
Copyright © 2010 ATOP Technologies, Inc.
All rights reserved. Designed in Taiwan
- 40 -
System Configuration
The System Configuration is used to show the device status such as the COM port link state and to
configure miscellaneous functions such as the device system time, the security of the device, and to
change the administrator password.
Fig 49. System Settings :Telnet
Operation: MainÆ [5]SystemÆ[1]Link State
“Link State” displays the link status of each serial port in the different modes of operation: TCP Server,
TCP Client or UDP mode.
Fig 50. Link State Display :Telnet
Operation: MainÆ [5] SystemÆ[2]Time
One may configure Time Setting either manually or automatically using NTP server. For NTP Time
synchronization, you need to specify the IP address of an NTP server. The common NTP server is
time.nist.gov. You may select different NTP server according to your network information. You may
contact your network administrator for NTP server information.