User`s manual

User manual Version 1.1

SE5408/SE5416 Multi-port

Serial Server

- 37 -

Fig 43. TCP Server for Link Mode: Telnet

Operation: MainÆ [3]COM Port SettingÆ[1-16]Select PortÆ[1]Link ModeÆ[2]TCP Client

In the TCP Client mode, the device will actively make a TCP connection to any computer host. You need

to configure the designated computer hosts.

On “Destination IP” and “Destination Port”, enter the expected server IP address and its port number. The

SE5408/SE5416 Multi-Port Serial Server supports up to two destination hosts.

Fig 44. TCP Client Link mode by Telnet

Operation: MainÆ [3]COM Port SettingÆ[1-16]Select PortÆ[1]Link ModeÆ[3]UDP

The SE5408/SE5416 Multi-Port Serial Server can also operate in UDP mode, where the device will send

data packets to a set of hosts using UDP connection. The device can support up to 8 groups of IP

addresses for eight sets of the computer hosts.