User`s manual

User manual Version 1.1
SE5408/SE5416 Multi-port
Serial Server
Copyright © 2010 ATOP Technologies, Inc.
All rights reserved. Designed in Taiwan
- 32 -
Set to Default
One may click on the “Set to Default and Restart” button to restore all device settings to the factory
defaults as shown in Fig 33.
Fig 33. Set to System Defaults: Web Configuration
Restart
When the system fails to respond, one can press the “Restart” button to reboot the system. Rebooting is
complete when the “Ready” LED on the front panel starts blinking.
Fig 34. Restart: Web Configuration