User`s manual

User manual Version 1.1

SE5408/SE5416 Multi-port

Serial Server

- 20 -

Here you shall look at the two information boxes. In the Device Information box, you can find the Kernel

version and AP version as shown in Fig 15. You can check on our website to obtain the current versions of

the Kernel and the AP. The Networking Information box displays MAC Address and IP Address for LAN 1

and LAN 2 as shown in Fig 16.

Fig 15. Device Information: Web Configuration

Fig 16. Network Information: Web Configuration

Network Configuration

You can configure the network information for the SE5408/SE5416 Multi-Port Serial Server device using

our web-based configuration. Click “Network” on the menu to pop up the network information page.

LAN 1 and LAN 2 Settings

To configure the LAN 1 interface, manually fill in the fields of IP Address, Subnet Mask, and Default

Gateway. You may check “Obtain an IP automatically” to let DHCP assign those fields. You can also

configure LAN 2 interface to assign those fields manually or automatically using DHCP.

Fig 17. LAN 1 Settings: Web Configuration

DNS Settings

Fill in the IP address of the primary DNS server in DNS1 field, and the secondary DNS server in DNS2

field. If you enable the option to obtain IP address automatically using DHCP on LAN1 and/or LAN2, the

DNS server addresses will be assigned automatically.