User`s manual

User manual Version 1.1

SE5408/SE5416 Multi-port

Serial Server

- 19 -

5. Web-based Configuration

The Web-based configuration method is the most common method to set up SE5408/SE5416 Multi-Port

Serial Server, and is the most user-friendly one as well. The only thing you need to do is to make sure that

the SE5408/SE5416 Multi-Port Serial Server to be configured is on the same LAN as the host computer.

The rest of configuration is fairly self-explanatory.

Every SE5408/SE5416 Multi-Port Serial Server device is equipped with a built-in Web server in the

firmware. Therefore, it can be accessed by using a web browser to configure device’s parameters.

While on a Web browser, enter the device IP (for example, http://10.0.50.100

if it connects to LAN1 port or

http://192.168.1.1 if it connects to LAN2 port), and the following authentication screen shall appear. If the

device is connected to LAN1 port, the default IP address is 10.0.50.100, or if it is connected to LAN2 port,

the default IP address is 192.168.1.1. Enter User name (default: admin) and Password (default: blank)

then click “OK”.

Fig 13. First (Authentication) Screen on a Web Browser

General Information

Once the User name and Password are correctly entered, the Overview window (Fig 14) shall appear.

Fig 14. Overview Window: Web Configuration