User`s manual

User manual Version 1.1
SE5408/SE5416 Multi-port
Serial Server
Copyright © 2010 ATOP Technologies, Inc.
All rights reserved. Designed in Taiwan
- 9 -
Device Size
3. Software Setup
Factory Default Settings
Note that the Serial Server comes two independent IP addresses for redundant Ethernet interfaces.
Default IP addresses
Interface Device IP Subnet mask Gateway IP
LAN 1 10.0.50.100 255.255.0.0 10.0.0.254
LAN 2 192.168.1.1 255.255.255.0 192.168.1.254
Note: Of the two LANs, only one is active at a time, depending on whether the user’s LAN begins
with 10 (10.x.x.x) or with 192 (192.168.x.x). It is not recommended to assign both LAN
interfaces to the 10.x.x.x, or both to 192.168.x.x network addresses.
Other default settings are shown in the following table:
Parameter Default Values
Security
User Name admin
Password Null (blank)
Serial