User`s manual

User manual Version 1.3

SW5002 Wireless Serial Server

- 72 -

Appendix D. Specifications

D.1. Hardware Specifications

System

CPU 150MHz RISC with MMU support

Memory Flash: 8MB, 2MB for Bootloader /

SDRAM: 16MBytes.

Interface Mini-PCI Slot (for Wireless Module)

Watchdog Hardware Watchdog Reset

Debug Port CPU Build in Com.

Wireless LAN

Protocols Compliance for IEEE802.11b/g

Modulation Type: CCK, DQPSK, DBPSK, OFDM (11g)

Topologies Infrastructure, Ad-Hoc

Security WEP 64-bit/128-bit data encryption

WPA Compatible (TKIP/AES Encryption)

RF Performance Tx Power 11b: 14dBm / 11g: 13 dBm

Rx Sensitivity: -66 dBm @ 54 Mbps, -80 dBm @ 11Mbps

Transmission Rate: 54 Mbps (max.) with auto fallback

Transmission distance: Up to 300 meters (@12 Mbps, in open areas)

Mobile for Fast Roaming

Interfaces Reverse SMA Connector for Antenna

Network

Protocol 10/100M Auto-Negotiation Fast Ethernet

Interface RJ-45 Connector with 2LEDs

Protection: Built-in 1.5 KV magnetic isolation

Application Configuration with Telnet Protocol

Serial

Protocols Support RS232/485/422 & Software Selection

Interface Terminal Block Connector –TB model (with 12KV ESD)

D-sub 9-pin Connector –DB Model (with 12KV ESD)

Parameters Baud Rate: 1200~921Kbps

Parity Check: None/Odd/Even/Mark/Space

Data Length: 7/8 Bit

Stop Bit: 1/2

Flow Control: None/ Software: Xon/Xoff / Hardware: RTS/CTS

Power

Input DC 9V-48V

Consumption 4.5 W max @Tx Mode